Corning ALTOS® all-dielectric cables are lightweight cables designed for duct and aerial (lashed) installation. The loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber.
Features And Benefits
• Fiber Category: multimode (OM2)
• Standards: according to National Electrical Code® (NEC®) Article 770
• Design and Test Criteria: ANSI/ICEA S-87-640
• Fiber Count: 60
• Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
• Number of Tube Positions: 6
• Number of Active Tubes: 5
• Outer Jacket Color: Black
• Operation: -40 °C to 70 °C (-40 °F to 158 °F )
• Max. Tensile Strength,: Short-Term 2700 N (600 lbf) / Long-Term 890 N (200 lbf)
• Weight: 80 kg/km (54 lb/1000 ft)
• RoHS: Free of hazardous substances according to RoHS 2011/65/EU
• Fiber Category: 50 µm MM (OM2)
• Wavelengths: 850 nm / 1300 nm
• Maximum Attenuation: 3.0 dB/km / 1.0 dB/km
• Serial 1 Gigabit Ethernet: 750 m / 500 m
• Serial 10 Gigabit Ethernet: 150 m / - m
• Min. Overfilled Launch (OFL) Bandwidth: 700 MHz*km / 500 MHz*km
• Minimum Effective Modal Bandwidth (EMB): 950 MHz*km / - MHz*km
• Flexible, craft-friendly buffer tubes
Facilitate easy routing in closures
• SZ-stranded, loose tube design
Isolates fibers from installation and environmental rigors and facilitates mid-span access
• Dielectric central strength member
No preferential bend and requires no bonding or grounding
• Medium-density polyethylene jacket
Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors)