ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 4 F, Single-mode (OS2)

ALTOS® Loose Tube, Gel-Free, All-Dielectric Cable with FastAccess® Technology, 12 F, Single-mode (OS2)

Corning ALTOS® cable with FastAccess® technology is an all-dielectric gel-free cable designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The innovative FastAccess technology feature combined with the all-dielectric gel-free loose tube design simplifies removal of the cable jacket reducing cable end access time by at least 50 percent. Equally important is the overall reduction in risk of inadvertent fiber damage and risk to installers from sharp cable access tools. The cable is fully waterblocked using craft-friendly, water-swellable materials, which means no clean up is required. The flexible buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric gel-free cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to handle.
Features And Benefits

 • Fiber Category: G.652.D
 • Standards: according to National Electrical Code® (NEC®) Article 770
 • Design and Test Criteria: ANSI/ICEA S-87-640
 • Fiber Count: 12
 • Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
 • Number of Tube Positions: 6
 • Number of Active Tubes 1
 • Outer Jacket Color: Black
 • Operation: -40 °C to 70 °C (-40 °F to 158 °F )
 • Max. Tensile Strength,: Short-Term 2700 N (600 lbf)
 • Weight: 73 kg/km (131 lb/1000 ft)
 • RoHS: Free of hazardous substances according to RoHS 2011/65/EU
 • Fiber Category: G.652.D
 • Wavelengths: 1310 nm / 1383 nm / 1550 nm
 • Maximum Attenuation: 0.4 dB/km / 0.4 dB/km / 0.3 dB/km

Part/Number: 012EU4-T4701D20