ALTOS-Loose-Tube-Gel-Free-Outdoor-Optical-fiber-Cables, 24 F, multimode (OM1)

ALTOS-Gel-Free, 24 F, multimode (OM1)

Corning ALTOS® all-dielectric gel-free cables are designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The loose tube gel-free design is fully waterblocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
Features And Benefits

 • Fiber Category: 62.5 µm MM (OM1)
 • Standards: according to National Electrical Code® (NEC®) Article 770
 • Design and Test Criteria: ANSI/ICEA S-87-640
 • Fiber Count: 24
 • Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
 • Number of Tube Positions: 6
 • Number of Active Tubes 2
 • Outer Jacket Color: Black
 • Operation: -40 °C to 70 °C (-40 °F to 158 °F )
 • Max. Tensile Strength,: Short-Term 2700 N (600 lbf)
 • Weight: 73 kg/km (49 lb/1000 ft)
 • RoHS: Free of hazardous substances according to RoHS 2011/65/EU
 • Fiber Category: 62.5 µm MM (OM1)
 • Wavelengths: 850 nm / 1300 nm
 • Maximum Attenuation: 3.4 dB/km / 1.0 dB/km
 • Serial 10 Gigabit Ethernet: 33 m / -
 • Min. Overfilled Launch (OFL) Bandwidth: 200 MHz*km / 500 MHz*km
 • Minimum Effective Modal Bandwidth (EMB): 220 MHz*km / -

Part/Number: 024KU4-T4130D20