Corning ALTOS® all-dielectric gel-free cables are designed for outdoor and limited indoor use for campus backbones in lashed aerial and duct installations. The loose tube gel-free design is fully waterblocked using craft-friendly, water-swellable materials, which means cable access is simple and no clean up is required. The flexible craft-friendly buffer tubes are easy to route in closures, and the SZ-stranded, loose tube design isolates fibers from installation and environmental rigors while allowing easy mid-span access. The all-dielectric cable construction requires no bonding or grounding, and these cables have a medium-density polyethylene jacket that is rugged, durable and easy to strip.
Features And Benefits
• Fiber Category: 50 µm MM (OM4+)
• Standards: according to National Electrical Code® (NEC®) Article 770
• Design and Test Criteria: ANSI/ICEA S-87-640
• Fiber Count: 48
• Fiber Coloring: Blue, Orange, Green, Brown, Slate, White, Red, Black, Yellow, Violet, Rose, Aqua
• Number of Tube Positions: 6
• Number of Active Tubes 4
• Outer Jacket Color: Black
• Operation: -40 °C to 70 °C (-40 °F to 158 °F )
• Max. Tensile Strength,: Short-Term 2700 N (600 lbf)
• Weight: 73 kg/km (131 lb/1000 ft)
• RoHS: Free of hazardous substances according to RoHS 2011/65/EU
• Fiber Category: OM4+
• Wavelengths: 850 nm / 1300 nm
• Maximum Attenuation: 3.0 dB/km / 1.0 dB/km
• Serial 1 Gigabit Ethernet: 1100 m / 600 m
• Serial 10 Gigabit Ethernet: 600 m / - m
• Min. Overfilled Launch (OFL) Bandwidth: 3500 MHz*km / 500 MHz*km
• Minimum Effective Modal Bandwidth (EMB): 5350 MHz*km / - MHz*km
• Gel-free waterblocking technology / Craft-friendly cable preparation
• Medium-density polyethylene jacket /Rugged, durable and easy to strip (while providing superior protection against UV radiation, fungus, abrasion and other environmental factors)
• All-dielectric construction /Requires no grounding or bonding