Fiber Optic patchcord Simplex LC to LC

LC to LC patch cord on single-fibre cable, with an outer diameter of 2 mm and a low-smoke, zero-halogen sheath. Length is variable

Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug Play Solutions.
When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.


Features And Benefits

 • Fibre Count : 1
 • Outer Jacket Material : LSZH™/FRNC
 • Fiber Category : SM (OS2)
 • Outer Jacket Color : Yellow
 • Operation : -20 °C to 60 °C
 • Cable type: Tight-Buffered
 • Length : 15 m
 • Outer Diameter : 2.0 mm
 • Minimum Bend Radius : 10 mm
 • Tensile strength : 150 N
 • Optical Specifications - Connector A,B
 • Insertion loss, typical : 0.1 dB
 • Insertion loss, max. : 0.3 dB
 • Reflectance, typical : ≤ -58 dB
 • Design - Connector A,B
 • Connector type : LC
 • Ferrule Material : Ceramic
 • Polish : UPC
 • Housing material : Composite
 • Housing Colour : Blue
 • Boot type : Individual
 • Boot colour : Blue
 • Optical Characteristics
 • Fibre Core Diameter : 9 µm
 • Wavelengths : 1310 nm / 1383 nm / 1550 nm
 • Maximum attenuation : 0.38 dB/km / 0.38 dB/km / 0.25 dB/km
 • Serial 1 gigabit ethernet : 5000 m / -
 • Serial 10 gigabit ethernet : 10000 m / 40000 m
 • Fibre compliance : ITU-T G.652.D and ITU-T G.657.A1

Part/Number: 020201R2Z31015M