Fiber Optic patchcord Simplex SC APC to SC APC

1 F SC Angled to SC Angled patch cord on single-fibre cable, with an outer diameter of 2.8 mm and a low-smoke, zero-halogen sheath. Length is variable.

Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug Play Solutions.
When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.


Features And Benefits

 • Fibre Count : 1
 • Outer Jacket Material : LSZH™/FRNC
 • Fiber Category : SMF-28® Ultra fibre
 • Outer Jacket Color : Yellow
 • Operation : -10 °C to 60 °C
 • Cable type: Tight-Buffered
 • Length : 6 m
 • Outer Diameter : 2.8 mm
 • Minimum Bend Radius : 14 mm
 • Tensile strength : 200 N
 • Wavelengths : 1310 nm / 1383 nm / 1550 nm
 • Linear Attenuation : 0.38 dB/km / 0.38 dB/km / 0.25 dB/km
 • Serial 1 gigabit ethernet : 5000 m / - / -
 • Serial 10 gigabit ethernet : 10000 m / - / 40000 m
 • Cable cutoff wavelength : 1260 nm
 • Optical Specifications - Connector A,B
 • Insertion loss, typical A : 0.15 dB
 • Insertion loss, typical B : 0.4 dB
 • Insertion loss, max. A : 0.15 dB
 • Insertion loss, max. B : 0.4 dB
 • Reflectance, typical A : ≤ -65 dB
 • Reflectance, typical B : ≤ -65 dB
 • Design - Connector A,B
 • Connector type A : SC
 • Connector type B : SC
 • Ferrule Material : Ceramic
 • Polish : APC
 • Housing material : Composite
 • Housing Colour : Green
 • Boot type : Individual
 • Boot colour : Green

Part/Number: 444401G3Z31006M