2 F Fiber Optic patchcord Two-fiber FC to FC

FC to FC patch cord on 2-fibres Zipcord cable, with 2.8 mm legs, and a low-smoke, zero-halogen sheath.

Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug Play Solutions.
When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.


Features And Benefits

 • Fibre Count : 2
 • Outer Jacket Material : LSZH™/FRNC
 • Fiber Category : 50 µm MM (OM2)
 • Outer Jacket Color : Orange
 • Operation : -10 °C to 60 °C
 • Cable type: Tight-Buffered
 • Length : 7 m
 • Outer Diameter : 2.8 mm
 • Minimum Bend Radius : 10 mm
 • Tensile strength : 400 N
 • Optical Specifications - Connector A,B
 • Insertion loss, typical A : 0.35 dB
 • Insertion loss, max. A : 0.5 dB
 • Insertion loss, typical B : 0.35 dB
 • Insertion loss, max. B : 0.5 dB
 • Design - Connector A,B
 • Connector type A : FC
 • Connector type B : FC
 • Ferrule Material : Ceramic
 • Polish : PC
 • Housing material : Composite
 • Housing Colour : Nickel
 • Boot type : Individual
 • Boot colour : Black
 • Optical Characteristics
 • Wavelengths : 850 nm / 1300 nm
 • Maximum attenuation : 2.8 dB/km / 1.0 dB/km
 • Serial 1 gigabit ethernet : 750 m / 600 m
 • Serial 10 gigabit ethernet : 150 m / -
 • Min. overfilled launch (OFL) bandwidth : 700 MHz*km / 500 MHz*km
 • Minimum effective modal bandwidth (EMB) : 950 MHz*km / -

Part/Number: 171702B5Z31007M