2 F Fiber Optic patchcord Two-fiber LC Duplex to LC Duplex

LC Duplex to LC Duplex patch cord on 2-fibres Zipcord cable,with 2 mm legs, and a low-smoke, zero-halogen sheath.Length is variable

Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug Play Solutions.
When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.


Features And Benefits

 • Fibre Count : 2
 • Outer Jacket Material : LSZH™/FRNC
 • Fiber Category : 62.5 µm MM (OM1)
 • Outer Jacket Color : Orange
 • Operation : -10 °C to 60 °C
 • Cable type: Tight-Buffered
 • Length : 1 m
 • Outer Diameter : 2.0 mm
 • Minimum Bend Radius : 10 mm
 • Tensile strength : 300 N
 • Optical Specifications - Connector A,B
 • Insertion loss, typical : 0.35 dB
 • Insertion loss, max. : 0.5 dB
 • Design - Connector A,B
 • Connector type : LC Duplex
 • Ferrule Material : Ceramic
 • Polish : PC
 • Housing material : Composite
 • Housing Colour : Beige
 • Boot type : Individual
 • Boot colour : Black / White
 • Optical Characteristics
 • Wavelengths : 850 nm / 1300 nm
 • Maximum attenuation : 3.1 dB/km / 0.8 dB/km
 • Serial 1 gigabit ethernet : 300 m / 550 m
 • Serial 10 gigabit ethernet : 33 m / -
 • Min. Overfilled Launch (OFL) Bandwidth: 200 MHz*km / 600 MHz*km
 • Minimum Effective Modal Bandwidth (EMB): 220 MHz*km / -

Part/Number: 050502K5Z20001M