2 F Fiber Optic patchcord Two-fiber SC APC-SC APC

SC Angled to SC Angled patch cord on 2-fibers Zipcord cable, with 2.8 mm legs, and a low-smoke, zero-halogen sheath.

Patch cables are used for non-permanent connections between patch panels, transmission equipment, etc. Pre-assembled cables allow for the implementation of complete Plug Play Solutions.
When such a solution is adopted with accurate dimensioning and appropriate cable routing, it is possible to install even large cabling systems rapidly.


Features And Benefits

 • Fibre Count : 2
 • Outer Jacket Material : LSZH™/FRNC
 • Fiber Category : SMF-28® Ultra fibre
 • Outer Jacket Color : Yellow
 • Operation : -10 °C to 60 °C
 • Cable type: Tight-Buffered
 • Length : 2 m
 • Outer Diameter : 2.8 mm
 • Minimum Bend Radius : 10 mm
 • Tensile strength : 400 N
 • Optical Specifications - Connector A,B
 • Insertion loss, typical A : 0.15 dB
 • Insertion loss, max. A : 0.4 dB
 • Insertion loss, typical B : 0.15 dB
 • Insertion loss, max. B : 0.4 dB
 • Design - Connector A,B
 • Connector type A : SC
 • Connector type B : SC
 • Ferrule Material : Ceramic
 • Polish : APC
 • Housing material : Composite
 • Housing Colour : Green
 • Boot type : Individual
 • Boot colour : Green
 • Optical Characteristics
 • Wavelengths : 1310 nm / 1383 nm / 1550 nm
 • Maximum attenuation : 0.38 dB/km / 0.38 dB/km / 0.25 dB/km
 • Serial 1 gigabit ethernet : 5000 m / -
 • Serial 10 gigabit ethernet : 10000 m / 40000 m

Part/Number: 444402G5Z31002M