Features And Benefits
• single mode fiber OS2, E9/125 µm, bend insensitive according to IEC 60793-2-50 type B6_a and B6_b and G.657.A2 and B2, compatible to G.652.D
• All fibers are bend insensitive.
• single mode patch cord I-V(ZN)H E9/125 OS2
• Duplex patch cords are logically crossed as a standard (A->B, B->A), logically uncrossed patch cords available on request.
• SC and LC connectors of duplex patch cords are always connected by duplex clips, ST are supplied without clips.
• Available in lengths between 0.5 to 20 m. The use of duplex connection cables is recommended for lengths of more than 20 m because of the higher mechanical strength.
• Low smoke, halogen free, flame retardant cable jacket (LSHF-FR)
• outer diameter 2.0 x 4.2 mm
• cable color: yellow
• Insertion loos : max. 0.3 dB
• Return loos : min. 50 dB
• duplex cord as zip-cord (figure 8) with two tight buffered fibers and aramide strain relief 100 % tested
• Single mode patch cords are tested by 100 % on insertion loss and return loss at 1310 and 1550 nm. An interferometer measurement is done in addition.
• The measurement is followed by a final visual control of the connectors according to IEC 61300-3-35.
• All patch cords are provided with a serial number and a barcode. This allows traceability and measured values can be made available at any time.