EDGE™ modules provide the interface between the MTP® connector on the trunk and the LC duplex jumpers that will then connect directly into electronics. The LC duplex adapters feature hinged VFL-compatible shutters that move up and out of the way when the connector is inserted. Specially designed indents in the shutters ensure that the end faces of the connectors are never touched. These shutters replace the standard dust caps that typically once removed are never replaced, exposing the interior end faces to dust particles and possible damage.
Features And Benefits
• Connector modules
Allow for fiber modularity while offering both front- and rear-loading capability
• Shuttered modules
Create one-hand operation while eliminating need to keep up with dust caps
Part Number | Product Details | Panels & Modules |
---|---|---|
ECM-UM12-05-93T-ULL | 12 F, LC Duplex to MTP® Connector, 50 µm multimode (OM3) | EDGE™ |
ECM-UM12-05-93V-ULL | 12 F, LC Duplex to MTP® Connector, 50 µm multimode (OM5) | EDGE™ |
ECM-UM12-04-89G-ULL | 12 F, LC Duplex to MTP® Connector, Bend-improved Single-mode (OS2) | EDGE™ |
ECM-UM12-05-93Q-ULL | 12 F, LC Duplex to MTP® Connector, 50 µm multimode (OM4) | EDGE™ |
ECM-UM12-18-89G-ULL | 12 F, LC APC Duplex to MTP® Connector, Bend-improved single-mode (OS2) | EDGE™ |