Reel In A Box, MIC® Tight-Buffered Cable, Riser - Corning

4 F Reel In A Box, MIC® Tight-Buffered Cable, Riser, multi mode, OM4+ - Corning

Reel in a Box is Corning's innovative packaging solution for small reels of fiber optic cable in all inside plant applications, such as collocation data centers and wireless projects. This packaging solution provides features that enable our customers greater efficiencies than before.
Corning MIC® riser cables are designed for use in riser and general purpose environments for intrabuilding backbone and horizontal installations. These multifiber cables use 900 μm TBII® buffered fibers to enable easy, consistent stripping and facilitate termination.
The fibers are surrounded by water-resistant, dielectric strength members and protected by a flexible, flame-retardant outer jacket. These cables meet the application requirements of the National Electrical Code (NEC Article 770) and are OFNR and FT-4 listed and comply with the ICEA S-104-696 tests. The all-dielectric cable construction requires no grounding or bonding, and the small diameter and bend radius allow easy installation in space-constrained areas
Features And Benefits

 • Fiber Count: 4
 • Fiber Category : 50 µm MM (OM4+)
 • Fiber Coloring : Blue, Orange, Green, Brown
 • Outer Jacket Color : Aqua
 • Fiber Length : 300 m (1000 ft)
 • Temperature Range, Operation : -20 °C to 70 °C (-4 °F to 158 °F)
 • Max. Tensile Strength, Short-Term 660 N (150 lbf) / Long-Term 200 N (45 lbf)
 • Wavelengths : 850 nm / 1300 nm
 • Maximum Attenuation : 2.8 dB/km / 1.0 dB/km
 • Serial 1 Gigabit Ethernet : 1100 m / 600 m
 • Serial 10 Gigabit Ethernet : 600 m / -
 • Min. Overfilled Launch (OFL) Bandwidth : 3500 MHz*km / 500 MHz*km
 • Minimum Effective Modal Bandwidth (EMB) : 5350 MHz*km / -
 • "Countdown" print indicates available cable remaining on the reel providing easier inventory management
 • Stackable boxes make storage more manageable
 • Smaller reel offerings mean smaller cable lengths than would normally be available
 • Cable cutting at Corning lowers operating expenses for our distributors and end users

Part/Number: 004T81-31191-B2