DCCS2 subassembly - METZ Connect

Features And Benefits

FIBER:
 • DCCS2 fiber optic subassembly MPO with 6 mounted LC-D adapters
 • port numbering of the DCCS2 19 inches subassembly frame remains in place when the fiber optic subassembly is installed
 • all locking levers of patch cords connected to DCCS2 subassemblies show upwards and are easy to handle at any time
 • on the back 1 x MPO adapter (exterior: key up) polarity, Method A
 • solid and refined subassembly housing
 • mounting version: DCCS2
 • variants: blue (OS2), heather violet (OM4), aqua (OM3), green (OS2 APC)
Copper:
 • 6 port RJ45 subassembly to connect 6 individual installation cables
 • component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified by GHMT
 • compliance with class EA up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, certified by GHMT
 • tested: components up to 600 MHz, link up to 800 MHz
 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
 • Alien Next optimized, shielded jacks
 • the locking levers of patch cords connected to DCCS2 subassemblies show upwards and are easy to handle at any time
 • connection of one data cable AWG 26/1 to 22/1 (solid wire) to LSA IDC terminal blocks
 • marking of conductor assignment to T568A
 • solid and refined assembly housing
 • shield tap for installation cable separate from strain relief
 • mounting version: DCCS2