• termination unit with C6Amodul 180°
• certified to GHMT Cat.6A re-embedded PVP
• component testing for Cat.6A to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT
• compliance with class EA up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09
• tested: components up to 600 MHz, link up to 800 MHz
• suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT
• connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC)
• migration to 25G-systems without special tools
• module plug direction 45° downwards
• strain relief snapped on to stuffer cap
• compatible with "design" central units of switch lines (note: 3 port central units at present only available from JUNG)
• not suitable for mounting in standard flush-mounted or cavity wall casings!
• variants: 1 port, 2 ports, 3 ports