The KE501 Kit (EasyTest KE500/PROBE510) improves speed and confidence in the installation and maintenance of wiring whether it is for power, telecommunication, alarm or control. EasyTest KE500 unit is fully protected to 500 V AC in TONE mode and up to 240 V AC in CONT mode, though it is not intended to be connected to live AC power lines for tracing. If the voltage on a connected line exceeds approximately 100 V the CONT LED will light as a warning. EasyTest KE500 can transmit either three continous tones (SOLID) or two alternating tones (ALT). The Solid or the Alt function is easily selected from the front panel using the ALT and SOLID buttons. An LED beside the button indicates the selected function. To start or stop the tone, first use the ON/OFF button to switch the unit on, then select the trace tone. The unit can be connected to send the trace tone to any kind of cable, including a live telephone line.
• durable wire leads with solid alligator clips
Six Sine-wave Frequencies selectable:
• ALT: 1000/800 Hz, SOLID: 1000 Hz
• SOLID: 2600 Hz, ALT: 2600/1900 Hz,SOLID: 577,5 Hz
• ALT: 577,5 Hz intermittant, Accuracie +/- 1% (Quartz)
• Battery: 9 V Alkaline 100 hrs battery life
• Dimensions:2.68” x 3.75” x 1.0” (68 x 96 x 25 mm) - 150g + 80g
• Trace Distance to Cable/Wire: Up to 15” (60cm)
